Home MobileAndroid Thermal imaging shows before and after

Thermal imaging shows before and after

by Maine Bacos

The iPhone 15 overheating issue has been a cause for concern for many users. Reports of the device becoming too hot to hold and experiencing high temperatures during charging and regular use surfaced shortly after the launch of the new iPhones. However, Apple has now released a software fix to address the problem.

Thermal imaging has been used to visually confirm and quantify the impact of the software fix. The images captured using a Forward-Looking InfraRed (FLIR) camera, also known as a thermal imaging camera, clearly showed the high temperatures reached by the iPhone 15 before the fix. These temperatures were significantly higher compared to other competing phones.

According to ZDNet, the thermal imaging camera recorded the iPhone 15 Pro Max reaching temperatures as high as 107.1 degrees Fahrenheit, while other iPhones and Android phones typically maxed out at 85 to 95 degrees during fast charging. The only other phone that came close to the iPhone 15’s heat levels was the Samsung Galaxy Fold 5, reaching a temperature of 98.7 degrees Fahrenheit.

However, after installing the iOS 17.0.3 update, the iPhone 15’s temperature readings showed a significant improvement. The devices no longer reached temperatures beyond the low to high 90s Fahrenheit range during fast charging. This was a drastic improvement compared to the consistently high temperatures recorded before the software fix.

Apple has acknowledged that the overheating issue was not caused by the Pro model’s change in chassis material from stainless steel to titanium. Instead, the company attributed the problem to a bug in iOS 17 and certain apps like Instagram and Uber that were putting excessive strain on the phone, leading to higher temperatures. The software fix addressed this issue, resulting in cooler operating temperatures for the iPhone 15.

It is worth noting that during the release of this software fix, some users were concerned that Apple might have throttled the performance of the A17 Pro chip to reduce heat production. However, benchtest results did not indicate any performance degradation as a result of the fix, providing reassurance to iPhone 15 users.

The thermal imaging readings and the subsequent improvement after the software fix demonstrate the effectiveness of Apple’s solution to the iPhone 15 overheating problem. Users should update their devices to iOS 17.0.3 for a cooler and more stable user experience.

In conclusion, the iPhone 15 overheating problem has been resolved through a software update. Thermal imaging confirmed the high temperatures experienced by the device before the fix, while subsequent readings showed a significant decrease in temperature after the update. iPhone 15 users can now enjoy a cooler operating experience with their devices.

You may also like